Power Points
We install and upgrade power points across Mandurah and surrounding suburbs. Whether you need extra points in the kitchen, weatherproof ones for outdoors, or modern USB-C power points, we make sure every install is safe, compliant, and neat. Our electricians handle everything from new installs, replacements and testing, so you can plug in with confidence.
Common Jobs We Handle
• Adding new general power points (GPOs) inside and outside • Upgrading to double or quad power points • USB-A and USB-C charging power points • Weatherproof outdoor power points for patios, sheds, and gardens • Relocating power points during renovations • Replacing damaged or unsafe power points
When to Call Us
• Power points feel warm or discoloured • RCD tripping when appliances are plugged in • Loose or broken faceplates • Buzzing, crackling, or sparking sounds • Not enough power points for your needs
How We Work
1.Assessment – We check the existing wiring and point position. 2.Install/Repair – Install the new power point or replace the old one. 3.Verification – Test RCDs and power point function. 4.Tidy & Handover – Clean up and vacuum, explain usage, and provide compliance certificates.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • RCD safety switch tested after each new power point install • Power points tested for correct operation, polarity and earthing
Pricing & Timeframes
• From $50-150 for Replacement of power points • From $100-350 for new installs of power points
Brands & Parts
We commonly use: • Clipsal, for power points and switches • Weatherproof enclosures from Clipsal • USB-C charging power points from Clipsal
Mini Case Study
Halls Head: A homeowner wanted a weatherproof power point for their new spa. We ran a dedicated circuit, installed a Clipsal weatherproof power point, and tested the RCD. The client now enjoys their spa safely without using unsafe extension leads.
FAQS
Q: Can I add USB power points to my existing plates? A: No, this requires the power point to be replaced with USB power point Q: Do outdoor power points need special protection? A: Yes, they must be weatherproof (IP-rated) and RCD-protected. Q: How many power points can go on one circuit? A: It depends on the circuit load – we’ll check your wiring before adding more. Q: Can you relocate a power point during renovations? A: Yes, we can move power points safely and patch the old wall box if needed.
LED Lighting
We supply and install LED lighting solutions across Mandurah and surrounding suburbs. From energy-efficient downlights to stylish pendants, dimmers, security lights, and garden lighting, we handle everything from upgrades to new installs. Our team ensures your lighting is safe, compliant, and enhances both function and appearance, while reducing energy bills.
Common Jobs We Handle
• Replacing halogen downlights with energy-saving LEDs • Installing dimmable LED downlights and switches • Pendant lighting for kitchens and dining areas • Security floodlights for driveways and backyards • Under-cabinet strip lighting for kitchens • Garden and outdoor feature lighting • Upgrading old fittings to LED for safety and efficiency
When to Call Us
• Lights flickering or dimming unexpectedly • Halogen lights running hot or burning out quickly • Uneven lighting across rooms • High electricity bills due to outdated lighting • Need better outdoor or security lighting
How We Work
1.Assessment – Check existing fittings, wiring, and lighting layout. 2.Install/Upgrade – Replace old lights or install new LED fittings. 3.Verification – Test dimmers, switches, and lighting circuits. 4.Tidy & Handover – Clean up, vacuum, and walk you through operation. 5.Compliance Certificates – Provide documentation for all completed work.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • Proper IP ratings for bathrooms, kitchens, and outdoor areas • Driver selection verified for safe dimming and efficiency
Pricing & Timeframes
• From $35–$90 per LED downlight replacement and installs • From $75–$300 for lighting replacement and installs
Brands & Parts
We commonly use: • Clipsal, SAL, Robus LED lighting solutions
Mini Case Study
Meadow Springs: A family wanted to upgrade their old halogen lights. We replaced 20 halogens with LED downlights, added dimmers, and installed two outdoor security floods. The result was a brighter, safer home with reduced power usage and no more heat issues.
FAQS
Q: Can I dim all LED lights? A: Not all LEDs are dimmable – we only supply fittings and drivers that are fully compatible. Q: What IP rating do I need in a bathroom? A: At least IP44 for areas exposed to steam or water. Q: Will LEDs lower my power bill? A: Yes, they use up to 80% less power than halogens and last much longer. Q: Can you retrofit LEDs into my existing fittings? A: In most cases, yes. We’ll assess and recommend the safest option.
Switchboards
Your switchboard is the heart of your home or business electrical system. We upgrade, repair, and replace switchboards across Mandurah and surrounding suburbs to ensure your property is safe and compliant. From RCD installations to asbestos panel replacements, we make sure your switchboard meets modern standards and protects you from electrical hazards
Common Jobs We Handle
• Upgrading old ceramic fuses to modern circuit breakers and RCDs • Installing additional circuits for renovations or new appliances • Adding surge protection for sensitive electronics • Labelling circuits for easy identification • Replacing asbestos-backed switchboards with modern, safe units • Repairs and maintenance for faulty or overloaded boards
When to Call Us
• Switchboard trips frequently or won’t reset • Burning smell or scorch marks around the board • Old ceramic fuses still in place • Tingling or shocks from appliances • Lights flickering or power dropping out in certain areas
How We Work
1.Assessment – Inspect existing switchboard and wiring. 2.Install/Repair – Replace fuses, install RCDs, or upgrade the full board. 3.Verification – Test all circuits, RCDs, and safety switches. 4.Tidy & Handover – Clean up, relabel the board, and provide documentation. 5.Compliance Certificates – Supply required electrical safety certificates
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • RCDs installed on all final sub-circuits • Test results for insulation resistance, polarity, and RCD trip times
Pricing & Timeframes
• From $250–$500 for minor upgrades • From $1,000–$2,500 for full switchboard replacements
Brands & Parts
• Clipsal, NHP, Hager, Schneider for breakers, RCDs, and switchboard components • Surge protection units from Clipsal & Hager • Fire-rated enclosures for compliance and safety
Mini Case Study
Greenfields: A homeowner’s old switchboard with ceramic fuses was tripping constantly. We replaced it with a modern switchboard containing RCBOs (RCD + breaker combined), added surge protection, and labelled every circuit. The house is now safe, reliable, and fully compliant with WA standards.
FAQS
Q: Do I need RCDs on every circuit? A: Yes, Australian law requires all final sub-circuits to be RCD-protected. Q: What are the benefits of surge protection? A: It protects appliances and electronics from power spikes caused by storms or network faults. Q: How do I know if my switchboard is asbestos? A: Boards from the 1950s–1980s often had asbestos backing. We’ll confirm and safely replace them if required. Q: Can you add circuits for new appliances? A: Yes, we can expand your switchboard and install new circuits for ovens, aircon, spas, and more.
Ovens & Cooktops
We install, wire, and repair ovens and cooktops across Mandurah and surrounding suburbs. Whether you’re upgrading to a new built-in oven, adding a cooktop during a renovation, or fixing appliance issues, we handle it all. Our electricians ensure your appliances are connected safely, on the right circuit, and fully compliant with Australian standards.
Common Jobs We Handle
• Installing and wiring new ovens and cooktops • Hard-wiring electric ovens into dedicated circuits • Adding or upgrading isolator switches • Fault-finding on tripping or underpowered appliances • Coordinating with gas fitters for gas/electric combos • Replacing old or damaged cabling for high-load appliances
When to Call Us
• Oven or cooktop trips the breaker when in use • Elements not heating correctly or underpowered • No dedicated circuit for a new appliance • Old oven replacement requires rewiring • Burning smell or sparking from the connection
How We Work
1.Assessment – Inspect your existing wiring, switchboard, and appliance specs. 2.Install/Repair – Wire in new ovens or cooktops with correct cabling and isolators. 3.Verification – Test the circuit, earthing, Insulation resistance and RCD. 4.Tidy & Handover – Clean up, explain isolator switch location and usage. 5.Compliance Certificates – Provide required paperwork for your records.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • Correct cabling and isolators installed for each appliance • Earth and insulation resistance tested before handover
Pricing & Timeframes
• From $140–$300 for a standard oven install • From $130–$500 for standard cooktop install • From $300–$800 for new oven or cooktop circuit
Brands & Parts
We commonly install and work with: • Westinghouse, Bosch, Miele, Electrolux ovens and cooktops • Clipsal isolator switches and fittings
Mini Case Study
Erskine: A family purchased a new electric oven but the old wiring wasn’t up to standard. We ran a new dedicated circuit, installed an isolator switch, and connected the oven. The appliance now runs safely and reliably, with paperwork supplied for compliance.
FAQS
Q: Do I need a dedicated circuit for my new oven? A: Yes, most ovens and cooktops require their own circuit to handle the load safely. Q: Can you reconnect a like-for-like oven without upgrades? A: If wiring and isolation meet current standards, yes. If not, we’ll upgrade it for compliance. Q: Why does my oven trip the breaker? A: Often due to a faulty element or undersized wiring. We can fault-find and fix the issue. Q: Do you coordinate with gas installers? A: Yes, we work alongside licensed gas fitters when needed for dual-fuel appliances.
Smoke Alarms
We install, replace, and service smoke alarms across Mandurah and surrounding suburbs. From mains-powered, interlinked alarms to simple replacements, we ensure your home meets Australian safety requirements. Whether you’re selling, leasing, or simply updating your alarms, our electricians install and test everything to keep your family safe and compliant.
Common Jobs We Handle
• Installing mains-powered smoke alarms with battery backup • Interlinking multiple alarms for full home coverage • Planning and fitting alarms in the right locations • Replacing expired alarms (end-of-life at 10 years) • Compliance checks for rental properties and property sales
When to Call Us
• Alarms chirping or false alarming frequently • No idea how old your smoke alarms are • Preparing a home for sale or rental • Expired alarms (10+ years old or yellowed casings) • Unsure if alarms are compliant with Australian requirements
How We Work
1.Assessment – Check current alarm locations, wiring, and compliance. 2.Install/Replace – Fit new mains-powered, battery-backed, or interlinked alarms. 3.Verification – Test alarms for operation and interlinking. 4.Tidy & Handover – Clean up and explain how to test alarms. 5.Compliance Certificates – Provide proof of installation and compliance.
Compliance & Testing
• Work completed to AS 3786 Smoke Alarm Standard • Placement and interlinking as per Australian requirements • Each alarm tested before handover
Pricing & Timeframes
•From $130–$200 per alarm installed/replaced
Brands & Parts
We commonly install: • Clipsal smoke alarms • 240V mains-powered alarms with 10-year battery backup • Interlinked alarms for full home coverage
Mini Case Study
Falcon: A landlord was preparing a property for lease and needed compliant alarms. We installed three interlinked mains-powered alarms with 10-year battery backup, tested them, and provided compliance certificates for the real estate agent.
FAQS
Q: How often should I replace my smoke alarms? A: Every 10 years, even if they still appear to work. Q: Do rental properties need interlinked alarms? A: Yes, Australian legislation requires interlinked smoke alarms in new installs. Q: What’s the difference between battery-only and mains-powered alarms? A: Battery-only alarms aren’t compliant for new homes or rentals. Mains-powered alarms with battery backup are required. Battery-only powered smoke alarms are allowed only in limited circumstances. Q: How can I test my smoke alarm? A: Press the test button monthly to ensure it sounds correctly.
Fans (Ceiling, Exhaust, Outdoor)
We install and service ceiling fans, bathroom exhausts, and outdoor alfresco fans across Mandurah and surrounding suburbs. From replacing noisy exhaust fans to installing new ceiling fans or outdoor-rated ceiling fans, we’ll make sure your fans run quietly, efficiently, and safely. Our team handles everything from wiring to testing, with compliance certificates provided.
Common Jobs We Handle
• Installing new ceiling fans with or without lights • Fitting bathroom exhaust fans with ducting • Outdoor alfresco fans for patios and verandas • Replacing noisy or wobbling fans • Adding wall controllers or remote speed controls
When to Call Us
• Ceiling fan wobbles or shakes • Unusual noises or humming • Poor airflow or ineffective operation • Steam build-up in bathrooms or laundries • Wanting better cooling in living or outdoor spaces
How We Work
1.Assessment – Check ceiling structure, wiring, and location. 2.Install/Replace – Fit ceiling, exhaust, or outdoor fans with correct fixings. 3.Verification – Test operation, speed settings, and airflow. 4.Tidy & Handover – Clean up, vacuum, and explain operation. 5.Compliance Certificates – Provide paperwork for installation.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • IP-rated fans used in bathrooms and outdoor areas • Secure fixings to prevent wobble or vibration
Pricing & Timeframes
• From $180–$280 for standard ceiling fan installs • From $65–$200 for exhaust fans installs
Brands & Parts
We commonly install: •Clipsal, Brilliant, Fanco, Mercator ceiling and exhaust fans •Outdoor-rated fans with IP55 or higher protection •Remote and wall control units for easy use
Mini Case Study
Wannanup: A client wanted alfresco fans for their patio. We installed two outdoor-rated ceiling fans with IP55 protection, wired them into a wall controller. The result was a cool, comfortable space ready for summer entertaining.
FAQS
Q: Can ceiling fans be installed on raked ceilings? A: Yes, we use extension rods and angled mounts to suit sloped ceilings. Q: Do outdoor fans need special ratings? A: Yes, outdoor fans require IP ratings to withstand moisture and weather. Q: Can a fan include a light as well? A: Absolutely, many fans come with integrated lights which we can install and wire. Q: My fan wobbles — can it be fixed without replacing it? A: Often yes, through balancing, adjusting fixings, or replacing worn parts.
Fault Detection
We provide expert electrical fault detection and repairs across Mandurah and surrounding suburbs. Using advanced testing equipment, we quickly locate the cause of tripping circuits, shocks, burning smells, or flickering power. Our team ensures faults are repaired safely, with full compliance testing, so your home or business stays reliable and risk-free.
Common Jobs We Handle
• Identifying causes of nuisance RCD or breaker trips • Locating damaged or burnt cabling • Repairing water-damaged wiring and outlets • Fixing loose or overheated connections • Diagnosing earth leakage faults • Finding hidden faults inside walls, ceilings, or underground
When to Call Us
• Frequent power outages or tripping RCDs • Burning smell from outlets or switchboard • Lights flickering or dimming • Shocks or tingles from appliances • Visible scorch marks or melted fittings
How We Work
1.Assessment – Discuss the fault and symptoms with you. 2.Testing – Use calibrated testing gear to locate the problem. 3.Repair/Replace – Fix damaged cabling, outlets, or faulty connections. 4.Verification – Test circuits, RCDs, and insulation resistance. 5.Tidy & Handover – Clean up and provide compliance certificates.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • Insulation resistance, earth loop impedance, and RCD trip times tested • Documented results provided where required
Pricing & Timeframes
• From $180–$280 for minor fault finding/repairs • Larger or hidden faults quoted after initial diagnosis
Brands & Parts
We commonly work with: • Clipsal, HPM, Schneider outlets and switches • High-quality connectors, cabling, and replacement parts for long-lasting repairs
Mini Case Study
Mandurah: A homeowner reported their RCD tripping randomly. We tested the circuits, identified water ingress in an outdoor fitting, replaced the damaged power point, and retested the system. The RCD now holds correctly, and the client has safe, reliable power again.
FAQS
Q: Why does my RCD trip randomly? A: This is usually caused by earth leakage or faulty appliances. We test to find the source. Q: Can you find hidden cable faults in walls? A: Yes, we use specialised testing equipment to locate faults without unnecessary damage. Q: My breaker keeps tripping — is it dangerous? A: Yes, repeated tripping indicates a fault that should be fixed immediately. Q: Do you provide a report after repairs? A: Yes, we issue compliance certificates and can provide test results if required.
Commercial Electrical
We provide reliable commercial electrical installation and maintenance services across Mandurah and surrounding suburbs. From new office fit-outs to factory upgrades and scheduled maintenance, Orbis Electrical ensures your business runs safely and efficiently with minimal downtime.
Common Jobs We Handle
• Office and retail fit-outs • Switchboard installations and upgrades • LED lighting and emergency lighting systems • Three-phase power installs • Test and tag services • Preventative maintenance programs • Data and communication cabling • Fault finding and repairs
When to Call Us
• You’re setting up or expanding your business premises • Your switchboard or wiring is outdated • You need scheduled maintenance to meet compliance standards • You’re experiencing electrical faults, outages, or tripping circuits
Brands & Parts
We commonly use: • Clipsal • Schneider Electric • NHP • Hager • Legrand
FAQS
Q: Can you install new power and lighting during an office fit-out? A: Yes, we handle complete commercial fit-outs, including power points, lighting, data, and switchboard upgrades to suit your layout and compliance needs. Q: Do you provide ongoing electrical maintenance for businesses? A: Absolutely — we offer regular service agreements to keep your systems running safely and efficiently, reducing downtime and costs. Q: Can you upgrade old switchboards to meet current standards? A: Yes, we can replace outdated switchboards and install safety switches, surge protection, and modern circuit breakers. Q: Do you work outside of business hours? A: Yes, we can schedule work after hours or on weekends to minimise disruption to your operations.
Emergency Lighting
We install, maintain, and test emergency lighting systems for businesses, offices, and commercial premises across Mandurah and surrounding suburbs. From exit signs to emergency battens, we ensure your site meets compliance requirements for safety and insurance. Our team provides full testing records, logbooks, and compliance certificates so you stay covered and audit-ready.
Common Jobs We Handle
• Installing new emergency and exit lights in commercial spaces • 6- monthly scheduled testing and maintenance of existing systems • Replacing failed or non-compliant fittings • Supplying logbooks, PDF service records and compliance records for businesses • Upgrading to energy-efficient LED emergency lighting
When to Call Us
• Exit lights not illuminating during power outages • Exit lights not illuminating when power is on • Emergency lights failing compliance tests • Preparing for building inspections or insurance checks • Renovations or fit-outs requiring new emergency lighting • Unsure if your system meets current requirements
How We Work
1.Assessment – Inspect the current emergency lighting setup and layout. 2.Install/Replace – Fit new LED emergency lights or replace failed fittings. 3.Verification – Test battery backup and illumination times. 4.Logbook Update – Record testing and maintenance for compliance. 5.Compliance Certificates – Provide paperwork for your records.
Compliance & Testing
• All work in line with AS/NZS 2293 Emergency Lighting Standards • Batteries tested to ensure minimum 90-minute operation • Results documented in logbooks for audits and inspections
Pricing & Timeframes
• From $120–$380 per emergency light install/replace • From $120–$900 for full compliance testing (site-dependent
Brands & Parts
We commonly use: • Clipsal, Stanilite, Clevertronics LED emergency and exit lights • Lithium battery-backed fittings for longer lifespan • High-efficiency emergency battens for large spaces
Mini Case Study
Mandurah: A retail store required compliance for an upcoming safety inspection. We tested all emergency lighting, replaced three failed exit signs with Clevertronics LED models, updated the logbook, and issued compliance paperwork. The store passed inspection with no issues.
FAQS
Q: How often do emergency lights need to be tested? A: Every 6 months, with results logged as per AS/NZS 2293. Q: Can I upgrade to LED emergency lighting? A: Yes, LED options reduce power use and provide longer battery life. Q: Do you provide logbooks for compliance checks? A: Yes, we supply and update logbooks for ongoing maintenance. Q: What happens if my business fails an emergency lighting test? A: We’ll identify the failed fittings, replace or repair them, and retest until compliant.
Thermal Imaging
We offer professional thermal imaging for homes, businesses, and industrial sites across Mandurah and surrounding suburbs. Using advanced infrared cameras, we can detect hot spots, loose connections, and potential faults before they cause costly damage or downtime. Thermal scans are ideal for preventative maintenance, insurance compliance, and troubleshooting electrical issues.
Common Jobs We Handle
• Thermal scans of switchboards and circuit breakers • Checking solar isolators and connections for overheating • Preventative maintenance scans of commercial and industrial equipment • Insurance-requested reports for compliance and safety • Detecting hidden faults that aren’t visible during normal inspections
When to Call Us
• Annual maintenance for your property or business • Insurance company requests a thermal scan report • Unexplained breaker trips or burning smells • Before buying or leasing a property • Preventative safety checks in high-load environments
How We Work
1.Assessment – Identify areas requiring scanning (boards, isolators, equipment). 2.Thermal Scan – Capture high-resolution infrared images of all connections. 3.Analysis – Identify hot spots, loose connections, and risk points. 4.Reporting – Provide a report with annotated images and risk ratings. 5.Action – Advise or carry out remedial works as required.
Compliance & Testing
• Reports issued with images, fault ratings, and recommendations • Preventative maintenance in line with AS/NZS 3000 Wiring Rules • Testing performed with calibrated thermal imaging equipment
Pricing & Timeframes
• From $150–$400 for residential or small commercial scans • Larger sites quoted by size and number of boards
Brands & Parts
We commonly use: • FLIR and Fluke infrared cameras for accurate scans • High-quality reporting software for annotated image reports
Mini Case Study
Greenfields: A warehouse manager requested a preventative scan before renewing insurance. Our thermal imaging identified an overheated connection inside a distribution board. We repaired and retested the connection, preventing a likely breakdown and ensuring insurance compliance.
FAQS
Q: What faults can thermal imaging detect? A: Overheating connections, loose terminals, and high-resistance joints. Q: Do you need to turn the power off? A: No, scans are performed while the system is live for accurate results. Q: Is thermal imaging only for commercial sites? A: No, it’s valuable for both homes and businesses, especially for switchboard safety. Q: How often should thermal imaging be done? A: Annually for businesses, or sooner if high loads or issues are suspected.
RCD Testing & Compliance
We provide professional RCD testing across Mandurah and surrounding suburbs to ensure your safety switches are operating correctly. RCDs protect against electric shock and fire hazards, but they must be tested regularly to meet compliance requirements. Our team uses calibrated test instruments, documents the results, and issues certificates for your peace of mind.
Common Jobs We Handle
• Routine RCD trip-time testing for homes and businesses • Compliance checks for rental properties and workplaces • Verifying RCDs after renovations or new installations • Fault-finding for nuisance tripping or non-operational RCDs • Supplying reports and compliance paperwork
When to Call Us
• RCD not tripping during the test button check • Frequent nuisance tripping with no clear cause • Preparing a home for sale or lease • Landlord needing annual safety compliance • Business requiring 6-monthly testing
How We Work
1.Assessment – Identify and all RCDs at your switchboard. 2.Testing – Push button testing or use calibrated equipment to test trip times and fault response if required. 3.Verification – Confirm correct function across all circuits. 4.Documentation – Record results and provide compliance certificates. 5.Advice – Highlight any non-compliant or faulty RCDs and recommend fixes.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • Testing performed in line with AS/NZS 3760 (Test & Tag Standard) • Trip times measured and recorded for compliance and insurance
Pricing & Timeframes
• From $4-15 per RCD for push or injection testing • Additional RCDs quoted at reduced rates
Brands & Parts
We commonly work with: • Clipsal, Hager, Schneider, NHP RCDs and RCBOs • Replacement RCDs for failed or non-compliant devices
Mini Case Study
Halls Head: A Business needed annual safety checks for a property. We tested all RCDs, found one with slow trip times, and replaced it with a new Clipsal RCBO. The property passed inspection, and the business owner received updated compliance certificates and test records.
FAQS
Q: How often should RCDs be tested? A: By law, rental properties require RCDs to be tested at least every change of tenancy. For safety, we recommend annual testing. Businesses generally require testing every 6-months. Q: What’s the difference between pressing the test button and professional testing? A: The button check confirms mechanical function, but only calibrated testing verifies actual trip times under load. Q: What happens if an RCD fails a test? A: It must be replaced immediately — we can supply and fit a compliant unit on the spot. Q: Can RCDs be retrofitted to older switchboards? A: Yes, we can upgrade older boards to include modern RCD protection.
Fire
We Test and maintain fire systems across Mandurah and surrounding suburbs. From fire panels to fire extinguishers we have you covered.
Common Jobs We Handle
• Fire panels • Fire hose reels • Fire extinguishers • Fire hydrants • Fire blankets • Fire pumps • Fire doors • Fire water tanks
When to Call Us
• Your fire equipment requires servicing • Not sure if your fire equipment is compliant • 12- monthly service agreements
Brands & Parts
We commonly use: • Ampac • Tyco • Simplex
FAQS
Q: Can I upgrade my fire panel to a newer model? A: Yes, we can replace or upgrade your fire panel to meet current standards, ensuring better protection and compliance with fire safety regulations. Q: Do I need to have fire extinguishers in all areas of my building? A: Yes, fire extinguishers are required in key areas, depending on the type of building and its use. We can assess your premises and recommend the best placement and type of extinguishers. Q: How often should fire extinguishers be serviced? A: Fire extinguishers need to be inspected 6-monthly, and replacing or pressure testing every 5 years. Q: Are fire extinguishers the only method of fire safety? A: No, fire extinguishers are an essential part of fire safety, but we also recommend installing smoke detectors, fire panels, and sprinkler systems for complete protection.
Aircon
We provide the electrical and refrigeration required for split system air conditioner installs or maintenance across Mandurah and surrounding suburbs. From running new dedicated circuits to installation and testing of the aircon unit, we make sure your aircon is wired and installed safely, operates efficiently, and complies with Australian standards. Our team works with all major brands, ensuring reliable cooling year-round.
Common Jobs We Handle
• Installing split system air conditioners • Installing new dedicated circuits for split systems • Fault-finding electrical issues on existing aircons • Fault-finding refrigeration issues on existing aircons • Fitting outdoor isolating switches
When to Call Us
• Aircon not operating correctly • Install a new split system aircon unit to cool your space • Your old split system aircon needs upgrading or replacing • Circuit breaker trips when aircon starts up • Aircon humming but not running properly • Installing a new aircon unit and need wiring done • Old isolators or wiring needing upgrades for safety
How We Work
1.Assessment – Check switchboard capacity, wiring, and load requirements. 2.Install/Upgrade – Run new circuits and install isolators if required. Install split system air conditioner in the required location. 3.Connect – Wire the split system safely into your supply. Connect split system aircon piping. 4.Verification – Commission split system aircon. Test circuits, RCDs, and isolator function. Test split system air conditioner operation. 5.Tidy & Handover – Clean up, explain operation, and supply compliance paperwork.
Compliance & Testing
• Work completed to AS/NZS 3000 Wiring Rules • Correct cable sizing and weatherproof isolators used • RCD protection and load testing verified before handover
Pricing & Timeframes
• From $250–$550 for electrical-only split system aircon connections • From $1400-3000 for supply and install of split system aircon (depending on size and location)
Brands & Parts
We commonly work with: • Mitsubishi, Hisense, Teco split systems • Clipsal weatherproof isolators and enclosures • Surge protection devices for added equipment safety
Mini Case Study
Lakelands: A homeowner had an old split system that wasn’t working correctly. We tested the unit and found it was beyond repair. We supplied and replaced the unit to suit the room size and location. The new aircon now runs smoothly heating and cooling as intended, keeping our client comfortable all year round.
FAQS
Q: Do you install the full aircon or just the electrical part? A: Yes, We install the full aircon side and install the electrical side of the aircon install. Q: Do I need a dedicated circuit for my new split system? A: Yes, most split systems require their own circuit to handle the load safely. Q: Can surge protection help with aircons? A: Yes, it protects your system from damaging power spikes. Q: How long does an aircon connection take? A: Usually 2–4 hours depending on wiring, isolator location, and access.
CLIENT REVIEWS
What our clients say